series am1p-nz 1 watt | dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r11.i 1 of 2 north america only features: models single output model input voltage (v) output voltage (v) output current max (ma) isolation (vdc) efficiency (%) am1p-0505s-nz 4.5-5.5 5 200 1000 78 am1p-1215s-nz 10.8-13.2 15 67 1000 79 input specifications parameters nominal typical maximum units voltage range 5 4.5-5.5 vdc 12 10.8-13.2 filter capacitor isolation specifications parameters conditions typical rated units tested i/o voltage 60 sec 1000 vdc resistance > 1000 mohm capacitance 60 pf output specifications parameters conditions typical maximum units voltage accuracy see tolerance graph short circuit protection momentary (1 sec) line voltage regulation for 1.0% vin 1.2 % of vin load voltage regulation load 10 ? 100% 10 % temperature coefficient 0.03 %/ o c ripple & noise at 20 mhz bandwidth 75 m vp-p general specifications parameters conditions typical maximum units switching frequency 100% load 150 khz operating temperature without derating -40 to +85 o c storage temperature -55 to +125 o c case temperature 90 o c cooling free air convection humidity 90 % case material plastic ul94-vo weight 1.8 g dimensions (l x w x h) 0.46 x 0.39x 0.30 inches 11.70 x 9.80 x 7.70 mm mtbf >1 000 000 hrs(mil-hdbk -217f, ground benign, t=+25 o c) note: all specifications in this datasheet are measured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. safety specifications parameters agency approvals ce standards iec60950-1 :2001 ? rohs compliant ? ? 8 pin dip package ? ? low ripple and noise ? ? high efficiency up to 79% ?
series am1p-nz 1 watt | dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r11.i 2 of 2 north america only pin out specifications external capacitor dimensions filtering note: 1. datasheets are updated as needed and as such, specifications ar e subject to change without notic e. once printed or downloaded , datasheets are no longer controlled by aimtec; refer to www.aimtec.com for the most current product specifications. 2. product labels shown, including safety agency ce rtifications on labels, may vary based on the date manufactured. 3. mechanical drawings and specifications are for reference only. 4. all specifications are measured at an am bient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specifie d. 5. aimtec may not have conducted dest ructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. cas numbers and other limited information are considered proprietary an d may not be available for release. 6. this product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control sys tems or other such applications which necessitate specific safety and regulatory standards ot her the ones listed in this datasheet. 7. warranty is in accordance with aimtec?s st andard terms of sale available at www.aimtec.com. vin (vdc) external capacitor (uf) vout (vdc) external capacitor (uf) 5 4.7 5 10 12 2.2 9 4.7 24 1 12 2.2 - - 15 1 pin single 1 - v input 4 +v input 5 +v output 6 no pin 7 -v output 8 no pin 11.70 (0.46) 9.80 (0.39) 0.50 (0.02) 7.62 (0.30) 2.54 (0.10) 7.62 (0.30) bottom view 7.70 (0.30) 4.10 (0.16) 2.54 (0.10) 0.50 (0.02) 14 5 6 7 8
|
